Consider an INCR4 burst below:
HADDR : 0x0 0x4 0x4 0x4 0xX 0xX HTRANS : NONSEQ BUSY BUSY BUSY IDLE IDLE
HRESP: OKAY ERR ERR OKAY OKAY
HREADYOUT: 0x1 0x0 0x1 0x1 0x1
In the example above, the first beat of the AHB burst has an error while the second beat is a BUSY from the manager. The protocol says that the subordinate MUST respond with an OKAY when the manager sends BUSY. However, in the example below, since the first beat caused a two step error response, I am not sure how it will respond to with an OKAY to the BUSY without terminating the two step error response (i.e. send only one cycle of ERR and the next cycle would have to be OKAY in response to the BUSY).
What is the correct behavior of the AHB5 subordinate when the first beat of the AHB burst causes an error response while the second beat is a BUSY from the master?
Thanks