• State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 8 replies
  • Answers 2 answers
  • Subscribers 94 subscribers
  • Views 4219 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Corstone SSE-300 FVP simulator does not work on ARM Dev Studio

Yu Gord

Hi.

I use the ARM Development Studio. And I tried to run the Corstone SSE-300 (MPS3) simulator on the Cortex-M55 but an error occurs.

Blog where possible hints would not open yet (community.arm.com/.../software-development-for-corstone-300

Possible problems: maybe I use the wrong model parameters
I tried "-C fvp_mps2.DISABLE_GATING=1 -C cpu0.FPU=1 -C cpu0.MVE=2"

or

"-C cpu0.enable_helium_extension=1 -C cpu0.vfp-present=1 -C cpu0.vfp-enable_at_reset=1".

Who managed to run the simulator? Please help me if it is possible to run the simulator?

Thanks!

Parents
  • 0 in reply to Ronan Synnott

    Hi Ronan,

    Thanks for the help!

    I have added the folder of the FVP executable to the path and now it starts. But now another error has occurred, the simulator is in pending mode.

    Can you please tell me what could be the problem?


    I have added some screenshots of the project settings:


    Thanks!

Reply
  • 0 in reply to Ronan Synnott

    Hi Ronan,

    Thanks for the help!

    I have added the folder of the FVP executable to the path and now it starts. But now another error has occurred, the simulator is in pending mode.

    Can you please tell me what could be the problem?


    I have added some screenshots of the project settings:


    Thanks!

Children
No data