• Locked Locked
  • Replies 8 replies
  • Subscribers 136 subscribers
  • Views 9199 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MALI-400 Driver Support Issue

Yasir Malik
Note: This was originally posted on 25th September 2012 at http://forums.arm.com

Hi,
I am working on Galaxy S3, Exynos quad-core, [font=sans-serif]1.4 GHz quad-core [/font]Cortex-A9 with MALI-400 MP.
The device is using Android Jelly Bean. Linux/arm version is Linux/arm 3.0.31 Kernel.
While using profiling (streamline) in DS-5, GPU snippets are not showing.
"Chart configuration is incompatible with this configuration is showing when GPU counters are selected.
Before that, I built gator.ko and gatord and copied them into same directory in target.
Using DS-5, I can get CPU performance counters but not GPU counters.
I even generated gator.ko with "GATOR_WITH_MALI_SUPPORT=MALI-400".
Can anyone kindly guide me about where are we missing something.
[size=2]Thanks a lot.[/size]
Yasir.

Parents
  • Note: This was originally posted on 26th September 2012 at http://forums.arm.com

    Hi Yasir,

    Reply from the Streamline team:

      The error "Chart configuration is incompatible with this capture" usually occurs when the counter that is to be displayed from the chart configuration was never captured.

      Generally there is a more explicit error message with the tooltip that might say something like "Missing source data: X"

     
    (but the 'X' bit is missing in your case).  Could you let me know which trace or counter this is reported on, it may help in diagnosing the problem.

    Ta,
    Mark
Reply
  • Note: This was originally posted on 26th September 2012 at http://forums.arm.com

    Hi Yasir,

    Reply from the Streamline team:

      The error "Chart configuration is incompatible with this capture" usually occurs when the counter that is to be displayed from the chart configuration was never captured.

      Generally there is a more explicit error message with the tooltip that might say something like "Missing source data: X"

     
    (but the 'X' bit is missing in your case).  Could you let me know which trace or counter this is reported on, it may help in diagnosing the problem.

    Ta,
    Mark
Children
No data