This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Not able to get GPU counters on Odroid XU3 using ARM Streamline

Hi,

I am trying to profile Mali GPU counters on Odroid XU3 using Streamline. I have downloaded DS-5 Ultimate Edition trial for this purpose and built and run the gator daemon on the board ( using the steps from https://github.com/ARM-software/gator )

1. I am having some trouble with the GATOR_WITH_MALI_SUPPORT=MALI_MIDGARD flags, make does not seem to recognize this option. Without it I am able to compile and run.

2. I am able to see the Cortex A15/A7 stats but no GPU counters are visible on Streamline. Is this related to the previous step? 

3. Does DS-5 Community Edition not support Streamline? I initially used that and it said there was no valid license.

4. Is there a way to read/log the GPU counter data on the board itself without using a host PC app like Streamline? If yes, could you please point me to documentation to enable this?

Thanks,

Manoj

Parents
  • Hi Lukas,

    Thank you for your response. I am trying to follow the documentation you linked. There is an issue with the config file, but I will fix that and try to enable the gator driver with Mali plugins.

    The differences between editions link was useful. It says that Community Edition should ideally work, but I am unable to use it as mentioned in the comment to Stephen.

    Are you aware of any methods/patches to be able to obtain Mali counter data on the board itself?

    Thanks,

    Manoj

Reply
  • Hi Lukas,

    Thank you for your response. I am trying to follow the documentation you linked. There is an issue with the config file, but I will fix that and try to enable the gator driver with Mali plugins.

    The differences between editions link was useful. It says that Community Edition should ideally work, but I am unable to use it as mentioned in the comment to Stephen.

    Are you aware of any methods/patches to be able to obtain Mali counter data on the board itself?

    Thanks,

    Manoj

Children
No data