This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to change HEX start address for flash

Hi, 
I created a HEX file using IAR with vector table .intvec start = 0x10000000 & ROM start and End with 0x10000000-0x00004FFF
( i.e goto Option>Linker> 1. Vector Table,  2. Memory Regions etc.)

When I try to write the HEX file to the flash memory, I got a error message, 
Data file contained an address which was outside the maximum allowable..


How can I change/modify this HEX so that I can write it to flash (start 0x0000)?

Thank you.

Parents Reply Children
No data