I use DS-5 to debugging linux kernel and device driver, shows "Failed to load symbols for "test.ko"", execute the following command:
add-symbol-file Z:/vmlinux
add-symbol-file Z:/test.ko
test.ko with debug_info and not stripped.
error message is:
ERROR(CMD685-COR11-IMG75): ! Failed to load symbols for "test.ko"! Failed to read the symbols from Z:\test.ko! No section relocation information provided for the relocatable ELF file "Z:\test.ko"
thanks
Hello, I select "Bare Metal Debug" in the Debug Configuration.
When select "Linux Kernel Debug" in the Debug Configuration, execute add-symbol-file Z:/vmlinux, Debug Control shows "Status: connected OS Support: Waiting for the OS to be initialised".
add-symbol-file Z:/vmlinuxWARNING(ROS60): Could not enable OS support as the OS does not appear to be initialized. This might be caused by a mismatch between the loaded symbols and the code on the target or because the OS is not up and running. Enabling OS support will be re-attempted when the target next stops.