• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 352 subscribers
  • Views 3444 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

interrupt signal when performing world switch on GICV3/4

林军

We have a question on the interrupt signal when performing world switch.

  1. Suppose the CPU is running in secure world (TEE). An interrupt(Non secure Group1) is generated from REE.
  2. With SCR_EL3.FIQ==0, it will be signaled as an FIQ, the exception is taken to S-EL1.
  3. EL3 performs world switch.
  4. Now the PE is in Non-secure stat, the interrupt is IRQ.

Does the GIC/CPU interface generate an extra interrupt signal when detecting world switch(NS-bit flop) with GICv3? Or is it still the same interrupt signal but only recognized as IRQ when switched to non-secure world?

Parents Reply Children