IRIS SAP (Sensor Access Point) is a stand alone Sensor Access Point node for the deployment of Wireless Sensor Networks (WSN) according to the IRIS ecosystem. Thus, the user can deploy spatially distributed autonomous IRIS SAP nodes using sensors to monitor…
IRIS BOX TRS is a state of the art cutting edge ARM based industrial Telecontrol Remote Server, developed by ISURKI as the result of more than 25 years of expertise in the design and deployment of industrial telecontrol systems for the management…
We do use our ARM based IRIS BOX PC industrial computer to control flow using a proportiona valve, but I do not understand the reason to use digital inputs as a set up value.
Usually, the flow real value is input into the controller as an analog…
Dhaval, one of us has clearly grabbed the wrong end of the
As phrased the question suggests that the device normally connects
to a PC via a USB connection, and the desire is to translate that USB
interface/function back to serial. This would…
or else you can install a linux distro on your pc (reinstall, or virtual box as you prefere).
In way to have a powerfull environnement
I don't know that I can help you much here, since I usually run lint from my editor and not the Keil IDE.
I did hop into uVision (v2.32) and tried it. I did "Setup PC-Lint", added the c:\lint\lnt directory in the top box, pointed it to the executable…
Dear Andrew Neil,
Do you have email box? I will send the schematic, code and PC software to you. Now, I am very confused. I don;t know how to solve this problem.
You don't need to change the PC host controller.
Modify the firmware of your device, to satisfy the timing.
For more confirmation,
Does the Vista box, the working one, equip UHCI host controller?
What does HCList tell about this PC?
One suspects it's not a cross-over cable.
This is generally why I use a switch or router. And in
circumstances where I want to monitor traffic I'd use an old HUB
device which reflects traffic to another box for analysis, either
just using a card…
Allright I See.. offcourse.. didn't think of that..
To use the physical UART of the microcontroller can I use the
ULink2 box in combination with an Terminal Emulator or is it only
possible when I connect an COM-cable to my PC?