This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MDK Plus 5.28 version compilation issue

Keil MDK Plus 5.28 version is currently being installed in my laptop but not able to compile code with my earlier worked license.
Tried all the ARM Compiler versions to compile code but not helping. Not able to figure out the issue..!!
About uVision information is as below:
IDE-Version:
µVision V5.28.0.0
Copyright (C) 2019 ARM Ltd and ARM Germany GmbH. All rights reserved.
License Information:
Suma M
Flex license: MDK Plus 5.28 (Flex) (mdk_plus)
Expired: Jul 2017
Tool Version Numbers:
Toolchain:        MDK Plus 5.28 (Flex)  Version: 5.28.0.0
Toolchain Path:    C:\Keil_v5\ARM\ARMCC\Bin
C Compiler:         Armcc.exe        V5.06 update 6 (build 750)
Assembler:          Armasm.exe        V5.06 update 6 (build 750)
Linker/Locator:     ArmLink.exe        V5.06 update 6 (build 750)
Library Manager:    ArmAr.exe        V5.06 update 6 (build 750)
Hex Converter:      FromElf.exe        V5.06 update 6 (build 750)
CPU DLL:               SARMCM3.DLL          V5.28.0.0
Dialog DLL:         TCM.DLL              V1.36.2.0
Target DLL:             STLink\ST-LINKIII-KEIL_SWO.dll      V3.0.6.0
Dialog DLL:         TCM.DLL              V1.36.2.0
On compiling I am getting below message:
Build started: Project: es-can-hl
*** Using Compiler 'V5.06 update 6 (build 750)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
Build target 'STM32F107VC'
Before Build - User command #1: svn_revision.bat
compiling svn_revision.c...
Error: C9555E: Failed to check out a license.License server system does not support this version of this feature.
Feature:       mdk_std_compiler5
License path:  ;c:\program files\arm\licenses\license.dat;
FlexNet Licensing error:-25,147
Check that your license details are correct in the License Management dialog of MDK. Additional information is available at:
 www.keil.com/.../license_management.htm
 If you need further help, provide this complete error report to your supplier or license.support@arm.com.
 - ARMLMD_LICENSE_FILE: 
 - LM_LICENSE_FILE: unset
 - ARM_TOOL_VARIANT: unset
 - ARM_PRODUCT_PATH: unset
 - Product location: C:\Keil_v5\ARM\sw\mappings
 - Toolchain location: C:\Keil_v5\ARM\ARMCC\Bin
 - Selected tool variant: mdk_std_flex
 - Checkout feature: mdk_std_compiler5
 - Feature version: 5.0201709
 - Flex error code: -25
Product: MDK Plus 5.28 (Flex)
Component: ARM Compiler 5.06 update 6 (build 750)
Tool: ArmCC [4d3637]
Please revert back ASAP.
Parents Reply Children