Dear All,
In FlashLoader_ASM();, There are main 2 thing operations.
1. Get initial MSP value
2. Get initial PC valie.
in gpio_tests example,
HADDR[11:0] has got 000---------->004--------->20C--------->2C8--------->2C4--------->2C8--------->2CC
HRDATA[31:0] has got --------------->20000208->010002c5->00000000->00000000->47804806->47004806
it meant that MSP is 20000208 and PC 010002c5, and PC will indicate that it jumps to reset_handler and executing the instructions I think.
From here, But I got some questions.
1. Why does not bootloader.HADDR increase at the some specific range 004--------->20C not 004--------->008?
2. Similar question of 1, bootloader.HADDR go with 2C8--------->2C4--------->2C8--------->2CC, but my expectation was that 2C8--------->2CC--------->2D0--------->2D4 not 2C8--------->2C4--------->2C8--------->2CC. Why does not HADDR increase sequentially?
3. I found some miss matched value in bootloader.HRDATA[31:0] with bootloader.hex(boot_hex.txt) But I can't understand why it is miss matched between HRDATA and bootloader.hex image file?