This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AMBA AHB Lite

 Why does the WRAP4 start with a NONSEQ?

Parents
  • According to Table 3.1 Transfer Type Encoding, HTRANS=NONSEQ specifies the following which contains the answer:

    Indicates a single transfer or the first transfer of a burst.

    The address and control signals are unrelated to the previous transfer.

    Single transfers on the bus are treated as bursts of length one and therefore the transfer type is NONSEQUENTIAL.

Reply
  • According to Table 3.1 Transfer Type Encoding, HTRANS=NONSEQ specifies the following which contains the answer:

    Indicates a single transfer or the first transfer of a burst.

    The address and control signals are unrelated to the previous transfer.

    Single transfers on the bus are treated as bursts of length one and therefore the transfer type is NONSEQUENTIAL.

Children
No data