This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASR6601 debuging problems (RDDI-DAP Error)

Hi,

I'm trying to use cheap nanoDAP debuging adapter to flash arm based ASR6601 mcu.

The conection seems to be done correctly, and an arm core seems to be detected

But trying to flash/erase/debug cause RDDI-DAP Error and "Error: Flash Download failed  -  Target DLL has been cancelled".

Anything could be done to fix it?

Thank you in advance.

Kris

Parents
  • I do not know this ASR6601 at all. So not sure if flash programming is really supported. Are you sure, a dedicated flash programming algorithm exists for this device? Check on the "Flash Download" tab, what is configured there.

    Also, are there any additional messages in the Build Output window, that could give a hint?

Reply
  • I do not know this ASR6601 at all. So not sure if flash programming is really supported. Are you sure, a dedicated flash programming algorithm exists for this device? Check on the "Flash Download" tab, what is configured there.

    Also, are there any additional messages in the Build Output window, that could give a hint?

Children