This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Write/read a file from PC with code on Keil for STM32L100

Hi,

I would like to know if it is possible to write/read text in a file (.txt) saved in a PC directory by using the STM32L100 code. Knowing that the board is always connected to the PC with a USB cable.

Thank you in advance for your help.

Top replies

Andy Neil over 3 years ago +1 verified

You can do this with semihosting via the debugger. https://www.keil.com/support/man/docs/armcc/armcc_pge1358787046598.htm Otherwise, you would have to have some app on the PC, and use the USB to communicate...

Parents

0 Andy Neil over 3 years ago in reply to EGGA JIAR

sure - you'd just have to work with whatever USB device profile(s) is/are available
Cancel
Up 0 Down

Cancel

Reply

0 Andy Neil over 3 years ago in reply to EGGA JIAR

sure - you'd just have to work with whatever USB device profile(s) is/are available
Cancel
Up 0 Down

Cancel

Children

No data