• State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 21 subscribers
  • Views 7569 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Keil MDK 5.34 st link v2 "Not a genuine St Device! Abort connection"

Ary

I'm about to start using C++ for embedded and chose STM32F103C8T6 AKA Blue Pill for my first project. Using Keil MDK 5.34 on my Windows machine I went to practice this series but I get the following error when I tap on Flash -> Download (F8). 

I tried many remedies notably, un-install/re-install the St Link V2 (screenshot below) driver, changing USB cable and port on the PC, and so on but no change in result thus far. 

 

Why do I get that error and what are you ideas on solving this issue, please?

Thanks beforehand for your time and help.

Parents
  • 0 in reply to Ary
    Ary said:
    there's not a solution for any of the problems mentioned above?
    1. If the chip on is not genuine - then you would expect the IDE to say that!
    2. "cannot load AXF" means that either the build failed, or you haven't built at all;
    3. The absence of a Hex file was explained.
Reply
  • 0 in reply to Ary
    Ary said:
    there's not a solution for any of the problems mentioned above?
    1. If the chip on is not genuine - then you would expect the IDE to say that!
    2. "cannot load AXF" means that either the build failed, or you haven't built at all;
    3. The absence of a Hex file was explained.
Children
No data