Using µVision V5.28.0.0. for STM32G071.Executing TIM3->EGR |= TIM_EGR_UG; will result in correct asm code, ;;;1156 TIM3->EGR |= TIM_EGR_UG; // Force update generation (UG = 1)0000b8 4608 MOV r0,r10000ba 6940 LDR r0,[r0,#0x14]0000bc 2101 MOVS r1,#10000be 4308 ORRS r0,r0,r10000c0 491c LDR r1,|L20.308|0000c2 6148 STR r0,[r1,#0x14]butWatch of TIM3 shows SR changed instead of EGRTIM3 SR 0x00000001.Seems in any info file for MDK and STM32G0 there is a wrong offset for watch of SR/EGR stored.Where can I modify this ?Best regards