• State Not Answered
  • Locked Locked
  • Replies 0 replies
  • Subscribers 21 subscribers
  • Views 439 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with uvision for STM32F479 MCU Code

Raghavendra G

Hi,

We were using a Keil License (purchased in 2014) for the below configuration. Now, due to some technical challenges, we have changed the micro-controller and hence the configuration also got changed. But we are facing an error. Please help in this regard.

Old Configuration:
MCU : STM32F407IG
Keil::STM32F4xx_DFP : 1.0.7
uVision : v5.10.0.0

New Configuration:
MCU : STM32F479II
Keil::STM32F4xx_DFP : 1.0.7 does not support above MCU. Hence downloaded the latest version 2.11.0
uVision : v5.10.0.0 was not supporting DFP v2.11.0. Hence downloaded the latest version 5.24

With the new configuration, we are getting "Flex Error Code: -25" when trying to compile. Please do help.

Thank you.