Hi, I wont to Assign Serial I/O to a PC COM Port. But i have problem, There is error undefined name of virtual register!
MAP 0x40000000,0x400FFFFF read write MODE COM1 9600,0,8,1 ASSIGN COM1 <S0IN> S0OUT ___________________^ *** error 30, line 3: undefined name of virtual register
How I can defined VTREG?
When I read VTREG, get onli this parameter:
DIR VTREG TRAPS: ulong, value = 0x00000000 TRIGFLT: ulong, value = 0x00000000 STCLK: ulong, value = 0x00000000 XTAL: ulong, value = 0x00B71B00 CLOCK: ulong, value = 0x00B71B00
There is not SIN and SOUT?
Please for help!
Hi, I sent VTREG list, but here is again: DIR VTREG
TRAPS: ulong, value = 0x00000000 TRIGFLT: ulong, value = 0x00000000 STCLK: ulong, value = 0x00000000 XTAL: ulong, value = 0x00B71B00 CLOCK: ulong, value = 0x00B71B00
There is not SIN and SOUT !
Regards, Goran
You haven't said what chip you're using.
Do Keil claim to offer serial simulation for that particular chip?
Have you loaded the appropriate device pack?
Hi,
1.I am using chip STM32F107VC!
2.Yes, Keil claim to offer serial simulation for STM32F107VC http://www.keil.com/dd/vtr/4889/8691.htm
3.I loaded the device STM32F107VC