Hello there,
I would need to know what is the format used for Keil µVision v4.23 when saving coverage information to a .kcd file
I've been able to get the format for the 8051 module here: http://www.keil.com/support/docs/3269.htm
Is there a similar source for the Cortex M1?
Best Regards,
Alois Wolff
Hi Sankalp,
Thank you for your answer. However this is not the information I am needing. My question was about the syntax used for the generation of the .kcd files so as to generate these type of files myself (and integrate coverage results from other tools) As you can see the link you provided does not quite answer this topic...
Best Regards, Alois Wolff
Hello Alios,
Since the .KXD format is not public, that means it could change at any time, depending on the Tool's needs, so you should not rely on it.
Starting in MDK-ARM version 5.22, you can Save the code coverage results in text file format using the COVERAGE GCOV * command
(see Sankalp's link)
Here is a GCC example of what the output may look like:
http://www.keil.com/support/man/docs/uv4/uv4_db_gnu_gcov.htm