Hey guys. I'm trying to lean how to work with stm32f2 series of microcontrollers.I just was very successful in lpc1768 and i programmed every thing i wanted using the user manual and the registers.I just built my project then added the start up file and just programming it by programming the registers.But in stm series i did this and it did'nt work. Has any one have experience on programming this series without using cmsis?
Hello. almost everything can be done at the register level :) there will be a lot of scribblings :) first you need to connect a file with notations and register values, namely #include "stm32f10x.h" and then everything is as usual :) eg: timer 1 access to the register ARR will be as follows TIM1-> ARR = 130; port With pin 13 set to 1 so that GPIOC-> BSRR = GPIO_BSRR_BR13; but in general, look inside the stm32f10x.x and you will be happy :)
As arman ilmak has not posted further since his "thank yo" post on 4 Jan, is it likely that (s)he's still waiting for answers on this?
"almost (sic) everything can be done at the register level"
What do you mean, "almost" ??
"first you need (sic) to connect a file with notations and register values"
Well, you don't actually need to do that - you could write it all yourself longhand using magic numbers if you really wanted ...