Hey guys , I'm using the dual-core NXP chip , I do not know exactly how to generate the image file for the slave core to be used by the master core. I want the image to be a .c or .h file which contains an array of the application code and I read the examples for the NXP and could not understand how it generates the .c image file . Any ideas ?!! Thx in advance.
Surely, this must be a fundamental requirement for working with this chip - so NXP must have documentation and examples for this ... ?
Thx for ur reply , the problem is to create the binary image itself , not reading it . The example is the NXP dual-core MCU provided by KEIL www.lpcware.com/.../lpc43xx-dual-core-examples The example outputs an image file from the Cortex-M0 project in the form of a C file that includes constant array which holds the app. The file is then included in the second project (the Cortex-M4). The array is like that unsigned char LR0[] = { 0x18,0x84,0x00,0x00,0xD5,0x00,0x00,0x00,0xD9,0x00,0x00,0x00,0xDB,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDF,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE3,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xEB,0x00,0x00,0x00,0x15,0x01,0x00,0x00,0xEB,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00, 0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00,0xD1,0x01,0x00,0x00, 0xEB,0x00,0x00,0x00,0xEB,0x00,0x00,0x00,0xEB,0x00}; Im sure there is some command in the user menu in the target options that generates the image file , but i do not understand it . Any ideas?