Weird thing is going on here.
I have LPC1788 board and I just started writing a simple application. If I initialize timer like this, code seems to be executed, but of course my timer interrupt is not called.
void initTimer (void) { LPC_TIM_TypeDef *timer = LPC_TIM1; LPC_SC->PCONP |= (0x1<<2); timer->TC = 0x00; //Clear Timer Counter timer->PR = 0x00; //No prescaler timer->MCR = 0x3; //enable interrupt timer->MR0 = 0x02710; //interrupt every 1ms //NVIC_EnableIRQ(TIMER1_IRQn); timer->TCR = 0x02; //reset timer timer->TCR = 0x01; //enable timer counter } void TIMER1_IRQHandler(void) { LPC_TIM1->IR = (1u<<0); // Reset the MR0 Interrupt; Writing a zero has no effect. decrementFlags(); }
As soon as I enable NVIC IRQ, my code crash and points to Default_Handler PROC in startup.s. Deducing R15(PC) with -8 and use U 0xXXX, I end up in SVC_Handler part. My Timer1_IRQ never got called.
There is really nothing going on in the code besides this. As I just started writing program and hit the wall...
Any idea what else could I try, to debug this ?
Thanks.
That is it. It works now! Thank you.
You're welcome. Always here to help.
Yeah