I need to write 2HIds in one composite device in STM32 microcontrollers.One for pointer mouse operation and other one for keypad operation.So i wish to know is it possible to do so?If yes will I need to write 2 separate report descriptors.I am using 2 interfaces and 2 ENDPOINTS (enp1 and enp2). Please help...
> 1. In Multi-TLCs as Rport-ID comes to picture Modifier-type ( INPUT(DATA,VARIABLE,ABSOLUTE) ) so do i need to change INPUT (0x81)
Report ID is applied when the report descriptor defines two or more Input (or Output or Feature) reports, to identify each report. Report ID doesn't have any other side effect. You may bind keyboard and mouse report descriptors without any change.
> 2. Mine is a custom Keypad with 30 buttons but still i will be sending 9 bytes ???
As Per said, yes.
> 3. My mouse sends 4 bytes from ENDP1 so as ReportID comes to picture will this increment to 5 bytes ???
One-byte of Report ID (2) preceeds your original mouse input report, to distiguish it from the keyboard input report (report ID 1).
> 4. My keypad is custom one so i am using both ENDP1 and ENDP2 in my HID for keypad. So my interface will be 1 and endpoints 2 . Am I correct ???
HID device should have single interrupt IN endpoint. If your "custom" keyboard would really need two IN EPs, you may append another keyboard report descriptor (TLC) for the second keyboard, and assign report ID 3 to it.
But I believe, even for "custom" keyboard, two keyboards aren't required. For example of full-keybaord, all keytops of alphabet, tenkeys, function keys are supported by single TLC.
Anyway, tell the details of your customization.
Tsuneo
Hi Tsuneo ,
I tried doing as you said , I wrote report id (1) , then copied Mouse HID and Report id(2) ,then copied keyboard HID and changed descriptor size accordingly . Thats it . However this time my PC is not detecting the new HID, It shows an exclamation mark along side and noew i am stuck .Is there anything else to do . Can you once again explain in detail how to sending both mouse and keyboard data through the same interface and same endpoint . Because I didnt understand the idea.How OS understands that which is report id and which is data.
The actual mouse data sends 4 bytes ,So now iam sending 5 bytes i.e reportid + 4byte mouse data It seems that I am doing something wrong somewhere.. ;)
Dhanush
Can you also explain me how to proceed with 2HID report descriptor composite device ??
> Can you also explain me how to proceed with 2HID report descriptor composite device ??
The implementation of composite device heavily depends on the USB stack on which you are working. Not just the descriptors, you have to modify - Get_Descriptor( HID_Report ) process - Enabling additional EP(s) etc.
Which one are you playing? - Keil RL-USB - ST's STSW-STM32046 - STM32_USB-Host-Device_Lib_V2.1.0 - ST's STSW-STM32121 - STM32_USB-FS-Device_Lib_V4.0.0 etc.
I am using STM32F103R8 and making it work as keypad-controller *** pointing device.
It was working for both individually however together they always fail.
> I am using STM32F103R8
And what is the USB library?