i am working on a project for the automatic power reading using gsm but getting some errors: please check the program and guide me
Build target 'Target 1' compiling codec.c... codec.c(2): warning C318: can't open file 'lcd.h' codec.c(3): warning C318: can't open file 'rtc.h' codec.c(5): warning C318: can't open file 'bcd2ascii.h' codec.c(6): warning C318: can't open file 'serial.h' CODEC.C(35): warning C206: 'lcdInit': missing function-prototype CODEC.C(36): warning C206: 'LCDstr': missing function-prototype CODEC.C(36): error C267: 'LCDstr': requires ANSI-style prototype Target not created
#include<reg52.h> #include <lcd.h> #include <rtc.h> #include<string.h> #include<bcd2ascii.h> #include<serial.h>
sbit sw1=P3^7; sbit sw2=P3^6; sbit sw3=P3^5; sbit buzzer=P2^3; sbit relay=P2^2; sbit rled =P3^4; sbit gled =P3^3; bit flag_sw,flagr=0;
static unsigned char k=0,s=0x84,*result,h,unit=0; unsigned char inc=23,check_flag=0,month_flag=0,month; unsigned char *time,*res; unsigned char idata byte1[100]; unsigned char *date,*u,i,j,a=0,b,c,d;
void main() { TMOD=0x20; // serial communication intialization TH1=0XFD;SCON=0X50;TR1=1;i=0; IE=0X91;IT0=0;
lcdInit(); // LCD intialization LCDstr("AUTOMATIC POWER",0x80); LCDstr("METER READING",0xc0); delay(2000);
gsm_check();gsm_rec(); //gsm modem intialization gled=0;rled=1;buzzer=1;relay=1;
while(1) //super loop {
//time display LCDstr("DATE ",0x80); LCDstr("TIME",0xc0); date=getDate(); LCDstr(date,0x86); time=getTime(); LCDstr(time,0xc6); flag_sw=0;delay(1000);
//units display putComL(0x01); LCDstr("UNITS=",0x80); putComL(0x86); unit=getCharE(0x15); u=bcdtoascii(unit); LCDstr(u,0x87);
delay(2000);
/**************checking********************/
a=getCharE(0x04); // gsm modem sending sms if(a>=28 ) { gsm_check(); delay(200); ES=0; unit=0; putCharE(unit,0x15); rled=0;gled=1; gsm_send(byte,"number"); }
//else case
if(a>=16 & d==c){month_flag=1;} else month_flag=0;month_flag=getCharE(0x20);
if(check_flag==0 & month_flag==1 &flagr==0){flagr=1;relay=0;rled=0;gled=1;buzzer=0;delay(100);buzzer=1;} else if(check_flag==1 ){ gled=0;rled=1;buzzer=1;relay=1;} delay(1000);
//receving sms for(j=0;j<100;j++) {if(byte1[j]=='*' &byte1[j+1]=='P' & byte1[j+2]=='A'& byte1[j+3]=='I'& byte1[j+4]=='D') {ES=0;LCDstr("received",0xc0); a=1;check_flag=1;putCharE(check_flag,0x10); gsm_rec(); }} //time setting
if(sw3==0){enter_time();} delay(1000);k=0;
}}
Please Guide Me...
I have carefully read the Hello Program sir. And with The help of those steps , I understand the process to Create the target and how to run the program. Thank You very much
can you Please tell me some more programs to study.
All other Keil samples!
Also, see here:
http://c-faq.com/