Hi,
I am working on MCB2300 (LPC2378) and I am using Keil uVision4. In my code I need to give some inputs to the code using serial window. Please let me know how to input some text using serial window
Regards, Pavan
"I don't get any display of these commands on my serial window"
Up until now, you have only said anything about providing input to the serial window; Now you say that the output to the window is not working, either.
In other words, your serial IO is not working at all!
This could be a problem with your application, or a problem in the way you're using the simulator - or both!
Therefore, you really need to go right back to basics:
Start with a simple, output-only, "Hello, world" program - and verify that you can get the output in the serial window.
Follow the example here: http://www.keil.com/support/man/docs/uv4/uv4_ex_hello.htm
When you have that working, modify the program to use a different UART - and verify that you can correctly re-configure the simulator to see its output.
When you have that working - and not before - modify the program to also accept input from a UART. Then verify that you can use the serial window to supply the input.
Having done all that, you should be confident that you can both use the UARTs in your programs and correctly configure & use the serial windows in the simulator.
Then - and only then - you can move on to getting the SD Card application to work...
My program is executing now. On MCB 2300 the SD card is not sitting in its appropriate position in the holder provided there. I need to hold it by pressing down and then run my program. Now I can access my sd card and perform all the operations. Thanks for your support