hi all,
I am on the learning stage of LPC2148 and I have done basic programs like interrupts ... ADC ... TIMER/COUNTER. But all the code I have written is in C Language.
Though I had written some basic progarams of LED in assembly but not the interrupt part.
Could any one here tell me what are the rules to write the assembly code for interrupts i.e. for FIQ, IRQ and NV IRQ.
If possible plz guide me with some source code.
I am using KEIL uvision 4.
Arvind Shrivastava
can any body gimme a simple code example.
The problem I am facing is ... whether the Interrupt handling by VIC variables are needed to be modied or CPSR values are to be set or reset for the interrupt.
Secondly how will i give the address of the ISR to any of the VICVectAddr register.
If some body has the code ... for KEIL then plz post it here!!!
Do you know how to do this in C language?
I have a list, the last item on my list, added recently, is "Write a tiny assembly example for LPC2368". But I don't think I will have enough time to complete my list.
A tiny assembly example for LPC2368 will not work on LPC2148. And the VIC of LPC2368 and the VIC of LPC2148 is different.
Yes I know how to do it in C Language.
I think I am not been able to make myself clear for my requirement though I had tried a lot to express my confusion and need for the guidance.
So let it be ... but if you guys have the assembly source code for the timer interrupt or any other interrupt and is possible for you to send to me ... then please send me.
The below code has been tested on my LPC2368 board.
#include "LPC23xx.h" #define VIC_BASE_ADDR 0xFFFFF000 #define VECT_ADDR_INDEX 0x100 #define VECT_PRIO_INDEX 0x200 #define HIGHEST_PRIORITY 0x01 #define TIMER0_INT 4 #define Timer0_Vect_Addr (*(volatile unsigned long *)(VIC_BASE_ADDR + VECT_ADDR_INDEX + TIMER0_INT*4)) #define Timer0_Vect_Prio (*(volatile unsigned long *)(VIC_BASE_ADDR + VECT_PRIO_INDEX + TIMER0_INT*4)) #define TIME_INTERVAL 7999999 void Timer0Handler(void) __irq { T0IR = 1; /* Clear Interrupt Flag */ FIO3CLR = (1<<26); /* LED On */ VICVectAddr = 0; /* Acknowledge Interrupt */ } void init_stuff(void) { Timer0_Vect_Addr = (unsigned long)Timer0Handler; /* Set Interrupt Vector */ Timer0_Vect_Prio = HIGHEST_PRIORITY; VICIntEnable = 1 << TIMER0_INT; /* Enable Interrupt */ T0MR0 = TIME_INTERVAL; T0MCR = 3; T0TCR = 1; FIO3DIR |= (1<<26); // 1 for Output } int main(void) { init_stuff(); while(1) { if ( T0TC > (TIME_INTERVAL/2) ) FIO3SET = (1<<26); /* LED Off */ } }
Will try to translate it into assembly with the magic power of KEIL toolchain.
Comment out the below line in your Startup.s
IMPORT __use_two_region_memory
Save the below code as "ASM_Test.s"
ARM AREA ||.text||, CODE, READONLY, ALIGN=2 Timer0Handler PROC ;;;14 ;;;15 void Timer0Handler(void) __irq PUSH {r0,r1} ;;;16 { ;;;17 T0IR = 1; /* Clear Interrupt Flag */ MOV r0,#1 LDR r1,|L1.172| STR r0,[r1,#0] ;;;18 FIO3CLR = (1<<26); /* LED On */ MOV r0,#0x4000000 RSB r1,r1,r0,LSL #3 STR r0,[r1,#0x7c] ;;;19 VICVectAddr = 0; /* Acknowledge Interrupt */ MOV r0,#0 STR r0,[r0,#-0x100] ;;;20 } POP {r0,r1} SUBS pc,lr,#4 ;;;21 ENDP init_stuff PROC ;;;22 ;;;23 void init_stuff(void) ADR r0,Timer0Handler ;;;24 { ;;;25 Timer0_Vect_Addr = (unsigned long)Timer0Handler; /* Set Interrupt Vector */ MOV r1,#0 STR r0,[r1,#-0xef0] ;;;26 Timer0_Vect_Prio = HIGHEST_PRIORITY; MOV r0,#1 STR r0,[r1,#-0xdf0] ;;;27 VICIntEnable = 1 << TIMER0_INT; /* Enable Interrupt */ MOV r0,#0x10 STR r0,[r1,#-0xff0] ;;;28 ;;;29 T0MR0 = TIME_INTERVAL; LDR r0,|L1.176| LDR r1,|L1.172| STR r0,[r1,#0x18] ;;;30 T0MCR = 3; MOV r0,#3 STR r0,[r1,#0x14] ;;;31 T0TCR = 1; MOV r0,#1 STR r0,[r1,#4] ;;;32 ;;;33 FIO3DIR |= (1<<26); // 1 for Output RSB r0,r1,r0,LSL #29 LDR r0,[r0,#0x60] ORR r0,r0,#0x4000000 RSB r1,r1,r1,LSL #15 STR r0,[r1,#0x60] ;;;34 } BX lr ;;;35 ENDP EXPORT __main __main PROC ;;;36 ;;;37 int main(void) PUSH {lr} ;;;38 { ;;;39 init_stuff(); BL init_stuff ;;;40 ;;;41 while(1) B |L1.168| |L1.136| ;;;42 { ;;;43 if ( T0TC > (TIME_INTERVAL/2) ) LDR r0,|L1.172| LDR r0,[r0,#8] LDR r1,|L1.180| CMP r0,r1 BLS |L1.168| ;;;44 FIO3SET = (1<<26); /* LED Off */ MOV r0,#0x4000000 LDR r1,|L1.184| STR r0,[r1,#0x78] |L1.168| B |L1.136| ;;;45 } ;;;46 } ;;;47 ENDP |L1.172| DCD 0xe0004000 |L1.176| DCD 0x007a11ff |L1.180| DCD 0x003d08ff |L1.184| DCD 0x3fffc000 __ARM_use_no_argv EQU 0 END
Create a project with the Startup.s and ASM_Test.s. Build it, Run.
I don't have too much time for this demo project.
I haven't studied the assembly code, that KEIL toolchain generated for me, I just quickly modified them to fit my need. There were some warnings when I built this assembly demo project. And the LED blinking was not regular as what I expected, when I tested this project with my LPC2368 board. So, this assembly demo project is very low quality, but it seems work.
Now, I have quickly done my homework.
Hi John Linq,
thanx a alot dear for your kind help, guidance and efforts. I really appreciate your work!!!
thanks once again
regards Arvind