• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 22 subscribers
  • Views 2046 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

what is the difference between interval and timeout in RTX51

hero0765 maxwell

Hi: I read a article named "RTX51 TINY: DIFFERENCE BETWEEN INTERVAL AND TIMEOUT" , but I still can not clarify the difference between interval and timeout . I hope that who can give me some simple and clarity examples to illustrate the difference between them. also who can give me a forum that discuss detailedly the RTX51 TINY.

Parents
  • 0 in reply to ashley madison

    #include "rtx51tny.h"
    #include "REG935.H"

    const unsigned char table[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80 ,0x40,0x20,0x10,0x08,0x04,0x02,0x01,0xFF,0x00};

    int counter0;
    int counter1;
    int counter2;
    int counter3;

    const unsigned char table[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

    void LED0 (void) _task_ 0
    { int i; os_create_task(1); os_create_task(2); while(1) {

    for (i = 0; i < 15; i++) {

    P1 = table[i]; os_wait(K_TMO,30,0);

    } os_send_signal(1); os_wait(K_SIG,0,0); counter0++; }
    }

    void LED1 (void) _task_ 1
    { int i; while(1) { os_wait(K_SIG,0,0);

    for (i = 0; i < 3; i++) { P1 = table[15];

    os_wait(K_TMO,30,0);

    P1 = table[16];

    os_wait(K_TMO,30,0); } os_send_signal(2);

    counter1++; }
    }

    void LED2 (void) _task_ 2
    { int i; while(1) { os_wait(K_SIG,0,0);

    for (i = 0; i < 8; i++) { P1 = table[i] | table[i+7]; os_wait(K_TMO,30,0); }

    os_send_signal(0); counter2++; }
    }

    Here is my programe, you can emulate it by the KEIL.
    Opening the "peripheral"-->"I/O port"-->"P1".you will
    see the movement of the P1.

    Now I want to use the os_wait(K_IVL,0,0) instead of the os_wait(K_TMO,0,0) to see the differnce between them.But I can not see the difference.So who can help me to modify the programe to show the difference clearly.

Reply
  • 0 in reply to ashley madison

    #include "rtx51tny.h"
    #include "REG935.H"

    const unsigned char table[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80 ,0x40,0x20,0x10,0x08,0x04,0x02,0x01,0xFF,0x00};

    int counter0;
    int counter1;
    int counter2;
    int counter3;

    const unsigned char table[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

    void LED0 (void) _task_ 0
    { int i; os_create_task(1); os_create_task(2); while(1) {

    for (i = 0; i < 15; i++) {

    P1 = table[i]; os_wait(K_TMO,30,0);

    } os_send_signal(1); os_wait(K_SIG,0,0); counter0++; }
    }

    void LED1 (void) _task_ 1
    { int i; while(1) { os_wait(K_SIG,0,0);

    for (i = 0; i < 3; i++) { P1 = table[15];

    os_wait(K_TMO,30,0);

    P1 = table[16];

    os_wait(K_TMO,30,0); } os_send_signal(2);

    counter1++; }
    }

    void LED2 (void) _task_ 2
    { int i; while(1) { os_wait(K_SIG,0,0);

    for (i = 0; i < 8; i++) { P1 = table[i] | table[i+7]; os_wait(K_TMO,30,0); }

    os_send_signal(0); counter2++; }
    }

    Here is my programe, you can emulate it by the KEIL.
    Opening the "peripheral"-->"I/O port"-->"P1".you will
    see the movement of the P1.

    Now I want to use the os_wait(K_IVL,0,0) instead of the os_wait(K_TMO,0,0) to see the differnce between them.But I can not see the difference.So who can help me to modify the programe to show the difference clearly.

Children
No data