i am using C51 compiler for my project.i downloaded C51 compiler from u'r web.i have a doubt that how to write programs for atmel89052 microcontroller i.e, the codes in writing programs.for eg.in calling tcon or any port how can i use the words either TCON or tcon.
thanks.
www.mcu-memory.com/.../THE_FINAL_WORD_ON_THE_8051.pdf
It appears that this link may be broken, or that server just can't cope with a 1.5M download :-(
You could try googling for "Final Word 8051" to see if you can find it anywhere else with a better connection...
This is a website in China.I checked it and make sure that the link has been moved by the webmaster.So the OP has to google.
I have succeeded in crawlloading it. The download rate is somewhat lower than 30KBps, so it may time out some connections.
BTW, overall it is a very nice book, although anything named 'final word' should be looked on suspiciously.
"anything named 'final word' should be looked on suspiciously."
Indeed - especially as it must be well over 5 years old by now...
What I liked in that book is that it includes a fair amount of real implementation work, with detailed steps using state machines for, e.g., ad-hoc serial communication protocols, and has a good coverage of assembly/C interworking.
It is NOT a starters book, and still requires knowledge of the Bible set and the datasheets, but offer good advice and guidance along the path.
As the author, I can tell you the book is alot older than 5 years old, it was actually written in the mid 90's. I don't do embedded systems anymore, but I assume much of the content of my book still applies, based on the number of sites hosting it for free download.
BTW: The title seemed amusing at the time it was chosen and was intended to be tongue in cheek.