Hi;
I buy a odroid-c1(the cpu is amlogic s805) which the GPU is Mali-450 MP4 and the os is ubuntu .I port the Mali driver on the Amlogic s802 which the GPU is Mali-450 MP6 and I run the Ubuntu os. The s802 can setup normally. The display is ok.But,When I run the glmark-es2 od kodi in the ubuntu which can run nomal on s805 (odroid),the display have nothing and the program exit automatically.
The serial output :
[ 38.726301@1] Mali<2>: Session started
[ 38.786947@3] efuse version is not selected.efuse_getinfo_byID
[ 38.947359@3] UMP<2>: Session closed
[ 38.947676@3] Mali<2>: Session has ended
Now I can not determine where the problem lies,anyone can help me? Thanks
Hi
If you are running under Ubuntu, i suggest you to install odroid-utility
~:sudo
sudo
#:wget -O /usr/local/bin/odroid-utility.sh https://raw.githubusercontent.com/mdrjr/odroid-utility/master/odroid-utility.sh#:chmod +x /usr/local/bin/odroid-utility.sh#:odroid-utility.sh
And run the update for Mali DDX, that will correct this probleme i mean.
Regards
hi;
Thank you I have a try .But is not the same as the CPU It doesn't matter ?
odroid can support odroid-c1（s805），now I use the s802.
Ok
I mean it is a kernel module problem.
S802 using meson8 and S805 using meson8b
You may will have to rebuild your kernel for use it correctly
in particular if now you're not on a Hardkenel soc (they have clearly modify the original code)