Hi,
I had an issue with the OpenCL Driver on my Chomebook.
I followed ARM's instruction and successfully boot into Linux. However, I got an error message said that libxcb-dri2.so missing. After install libxcb-dri2.0-dev, I can compile Mali OpenCL SDK sample codes. But they won't be executed correctly under X11 or via fbdev. I past error message below. Any suggestion? Thanks.
> ./hello_world_opencl OpenCL error: CL_OUT_OF_HOST_MEMORY Creating an OpenCL context failed. common.cpp:248 Failed to create an OpenCL context. hello_world_opencl.cpp:39 > ldd hello_world_opencl libOpenCL.so => /opt/mali/fbdev/libOpenCL.so (0x76efc000) libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0x76e4a000) libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0x76e39000) libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0x76d55000) /lib/ld-linux-armhf.so.3 (0x76f07000) libmali.so => /opt/mali/fbdev/libmali.so (0x76304000) libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0x762e9000) libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0x7627e000) librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0x76270000) libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0x76265000)
> ./hello_world_opencl
OpenCL error: CL_OUT_OF_HOST_MEMORY
Creating an OpenCL context failed. common.cpp:248
Failed to create an OpenCL context. hello_world_opencl.cpp:39
> ldd hello_world_opencl
libOpenCL.so => /opt/mali/fbdev/libOpenCL.so (0x76efc000)
libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0x76e4a000)
libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0x76e39000)
libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0x76d55000)
/lib/ld-linux-armhf.so.3 (0x76f07000)
libmali.so => /opt/mali/fbdev/libmali.so (0x76304000)
libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0x762e9000)
libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0x7627e000)
librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0x76270000)
libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0x76265000)
The steps given at Graphics and Compute Development on Samsung Chromebook « Mali Developer Center
worked for me without any issues except couple things.
1: Steps of Section 5.2.2, ensure you do not miss quotation mark echo “deb http://ports.ubuntu.com/ubuntu-ports/ precise universe” >> /etc/apt/sources.listMissing quotation mark will jeopardize the apt source list.
2: git clone git://git.linaro.org/arm/xorg/driver/xf86-video-armsoc.git won't work. Try git clone http://git.linaro.org/git-ro/arm/xorg/driver/xf86-video-armsoc.git.
3. Needed to nstall libxcb-dri2-0-dbg package on the target file system.
Though, I am unable to setup the network connections over wifi. I tried nmcli utility but it seems the wifi device is not present. Pointers??
Thanks!
Bizarre, git clone git://git.linaro.org/arm/xorg/driver/xf86-video-armsoc.git works fine for me at home.