Hi sir,
T1=NON-SEQ
T2=BUSY
T3=SEQ
T4=SEQ
T5= SEQ
This is for WRITE operation:
i am using a BUSY state for T2. Then my WAIT state for till T3. I have read from the forum if WAIT state u are using a BUSY transfer, you can change next clock on the valid transfer.
If i change the HTRANS to the valid transfer my T1 data will be maintained for till T3 clock. Then what about the BUSY transfer.
This same as applicable for READ operation.And this is only for WAIT STATE.
Regards
Rajaraman R