Hi, I wanted to start learning RTOS in ARM Cortex M Processors. I currently work on Cortex M0 IC provided by Nuvoton where I use the BSP to get things done.
Now I need to move a step ahead and start learning RTOS and Implement it .
I had gone through many documents and videos relating to this, but still I don't know where and how to start?
I understood the basics of task scheduling,preempting and executing etc of RTOS from the sources I had gone through.
I would need exact guidelines to just start with the things, once started I can go further myself . Thank You. :-)
Hi arunjoec,
More than 2 weeks ago, jacobbeningo conducted the webinar Getting Started with FreeRTOS and NXP Kinetis using TrueSTUDIO. I don't know if this is going to repeat. Also, this webinar uses FRDM-K64F Freedom Development Platform for Kinetis K64, K63, and K24 MCUs from NXP.
Since you stated that "I had gone through many documents and videos relating to this" I don't know if these tutorials/demos will still help:
FreeRTOS Quick Start Guide
FreeRTOS Demo Applications
Also, in my opinion, it is relatively harder to find an RTOS for the microcontroller that you are currently working (Cortex M0 IC provided by Nuvoton). For ARM Cortex-M, more RTOSes run on M4 and M3.
Regards,
Goodwin
Sir,
Thanks for your reply, I will definitely go through this webinar.
I wish if more people give me reply like this.