Hello all,
I have access to both a SAMDA1-XPRO and a SAMC21-XPRO. I also have an ATBTCL1000-XPRO with which I need to establish a bluetooth connection to a smartphone. I powered up the ATBTLC1000-XPRO which was connected to the SAMC21-XPRO and tried locating it using my phone. However, I could not find it. I tried both an ios and an android phone and even the SAMDA1 but no success so far. How can I accomplish this? I aim to have the SAMC21 or the SAMDA1 connect to a LIN bus and want to send commands over bluetooth from my phone through the ATBTLC1000. Do I need to write any specific code that lets the ATBTLC1000 be discovered by my phone? Can anybody help me?
Thanks
What code are you running on the MCU?
How have you configured the BTLC1000 device?
Did you use the code examples provided by Atmel?