Hi I am trying to build Uboot for the Google Coral board.I did the following on my Ubuntu 20.04 laptop:sudo apt install g++-aarch64-linux-gnusudo apt install device-tree-compilergit clone https://coral.googlesource.com/uboot-imxmake ARCH=arm64 mx8mq_phanbell_defconfigmake CROSS_COMPILE=aarch64-linux-gnu- u-boot.imxI am getting an error message at the end of the build and it says something like Can't open spl/u-boot-spl-ddr.bin.Anyone has a clue what is going on? Thank you so much.
The README is from the master branch of the 'u-boot' upstream project.
I think I did see those steps work with https://coral.googlesource.com/uboot-imx y'day. But, I am not not aware of the differences between the various trees. More specifically, if you are not allowed anything except 'make u-boot.imx', then you may want to raise a question with those who recommended that command, or with Google. I suppose that 'make u-boot.imx' would also fail similarly with the 'u-boot' upstream project.
Thank you so much again for your reply. Could you point me to the link for the uboot master branch upstream project? Appreciate it.