• State Accepted Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 4658 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

JUNO SCP Binaries

Pramod Kumar

I've one Juno Board , print from boot- Configuring motherboard (rev C, var A).., and tried to update fip.bin file.  Once bl2.bin file in fip is modified I see below error upon booting-

OTICE:  BL2: Built : 12:45:45, Jul 30 2015

ERROR:   Detected an incompatible version of the SCP firmware.

ERROR:   Only versions from v1.7.0 onwards are supported.

ERROR:   Please update the SCP firmware.

ERROR:   BL2: BL3-0 transfer failure

ERROR:   Failure in platform-specific handling of BL3-0 image.

ERROR:   Failed to load BL3-0 (-1)

Which indicates that it expect new SCP firmware image.

could anybody let me know where these SCP firmware images could be find?

Parents
  • 0

    Hi,

    You can get the latest BL3-0 image from one of the prebuilt binary archives hosted on the Linaro Platforms page.

    For example, download the 'juno-latest-oe-uefi.zip' archive, and then find 'bl30.bin' in the /SOFTWARE/ folder. You'll want to update your FIP to have this BL3-0 rather than the one it already has.

    Hope that helps,

    Ash.

Reply
  • 0

    Hi,

    You can get the latest BL3-0 image from one of the prebuilt binary archives hosted on the Linaro Platforms page.

    For example, download the 'juno-latest-oe-uefi.zip' archive, and then find 'bl30.bin' in the /SOFTWARE/ folder. You'll want to update your FIP to have this BL3-0 rather than the one it already has.

    Hope that helps,

    Ash.

Children
No data