Using movw and movt to load a label address into a register in Arm 32 architecture. but this is not position independent code.
movw r1, #:lower16:ASM_NAME(forkx)movt r1, #:upper16:ASM_NAME(forkx)
As per the manual also it specifies that it will be resolved at the link time.
Need a position independent code, so as per the manual adr, adrl can be used, but getting below error:
../asm-arm/unix_arm.S:115:1: error: unsupported relocation on symboladr r1, __be_forkx
../asm-arm/unix_arm.S:60:1: error: invalid instruction, did you mean: adr?adrl r1, __be_forkx
it seems label can not be used in the aarch32, it is fine in aarch64 and works as intendent.
is the usage of adr command is improper? Is there a way to achieve this in aarch32? is there any equivalent command that can be used?
The 1.s pasted earlier tries to read from the address of forkx. That read is not needed. I have updated the post with a modified 1.s.
I am trying this, with this individual file compilation is fine. now have to check in a arm32 platform
in parallel started looking into the GCC compiler.
with gcc adrl command is also supported but for the same adr or adrl command getting the below error:
adrl r1, __be_forkx
error:
../asm-arm/unix_arm.S: Assembler messages:../asm-arm/unix_arm.S:61: Error: undefined symbol __be_forkx used as an immediate value
GLOBL_REF(__be_forkx)#.global __be_forkx
is added on top for global reference. is there anything going wrong?
DeepakHegde said:I am trying this, with this individual file compilation is fine. now have to check in a arm32 platform
In addition, does the binary also use a global offset table (GOT)? If so, it might be easier to just keep track of the location of got and patch its entries. If a GOT is present and is being used, it is likely that the address of the global/external symbol forkx is in one of its entries. There might be a different assembler syntax to refer to a got entry for a global.
DeepakHegde said:../asm-arm/unix_arm.S:61: Error: undefined symbol __be_forkx used as an immediate value
adr/l won't work with external symbols.