• Locked Locked
  • Replies 3 replies
  • Subscribers 120 subscribers
  • Views 4783 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Info required on Semihosting support for bare metal

Anand

Hi,

I am  trying to get the prints through semihosting . Currently i followed the below steps

1. Created simple hello world application

2.Using DS5.23 eclipse with VF_Cortex_A9x4 

3.Once connected to target, semihosting is auto enabled

Print messages are getting displayed on "Target Console" ,Since semihosting is enabled i want to know how to redirect to new console, is there any procedure to follow for semihosting. Kindly provide the details

Parents

  • Is your question generic, or specific for Cortex A9 and DS5?

    Generally speaking, semihosting requires good support from the debugger and means more then printing trace messages, it provides the application a method to access part of the environment available on the host. A typical application is to run unit tests, that return an exit code and create an XML file with the test results.

    I have no experience with DS5, but another environment with very good support for semihosting is SEGGER J-Link + GDB Server + GNU ARM Eclipse.

Reply

  • Is your question generic, or specific for Cortex A9 and DS5?

    Generally speaking, semihosting requires good support from the debugger and means more then printing trace messages, it provides the application a method to access part of the environment available on the host. A typical application is to run unit tests, that return an exit code and create an XML file with the test results.

    I have no experience with DS5, but another environment with very good support for semihosting is SEGGER J-Link + GDB Server + GNU ARM Eclipse.

Children
No data