Hello Forum,
I am running the Xilinx ZynqMP+ platform with Cortex-A53 and Mali-400MP2. When trying to run performance analysis with ARM Streamline 7.8.0 using gator daemon prebuild 7.8.0 I get the following error:
./gatord -d [...] [4605.8953405] INFO: MaliHwCntrDriver(mali_userspace/MaliHwCntrDriver.cpp:20): There are no mali devices to create readers [...]
Root cause is that my device only has a "/dev/mali" entry, but gatord searches for "/dev/mali0" (and higher). If I create a symlink I get one step further and get this error message:
ln -s /dev/mali /dev/mali0 ./gatord -d [...] [3240.0390221] INFO: probe(mali_userspace/MaliDeviceApi.cpp:233): MaliDeviceApi: Failed setting ABI version ioctl - may be r21p0 or later... [3240.0393474] INFO: probe(mali_userspace/MaliDeviceApi.cpp:535): MaliDeviceApi: Failed setting ABI version ioctl for JM based ddk. Trying with CSF ioctl version [3240.0393969] INFO: probe(mali_userspace/MaliDeviceApi.cpp:540): MaliDeviceApi: Failed setting ABI version ioctl for CSF based ddk [3240.0399230] INFO: MaliHwCntrDriver(mali_userspace/MaliHwCntrDriver.cpp:20): There are no mali devices to create readers [...]
Checking with lsmod the kernel module "mali" is successfully loaded, and tools like glmark2 run without troubles.
root@device:/# lsmod Module Size Used by [...] mali 356352 0 [...]
As this Xilinx chip still uses Mali drivers DX910-SW-99002-r9p0-01rel0 from 2018, I also tried to go back in time and use gatord prebuild 6.9 (release 2019.0) and 6.8 (release 2018.0). Same problem, slightly different error messages.
Any clues what is going wrong here? Thanks!
Thanks Peter Harris!But if I see this correctly, it is no longer possible to acquire a (evaluation) license for this old version, or am I missing something?
I suggest you open a support case via the Support link above (https://developer.arm.com/support) I think the last version with support is "Arm DS 2019.0".
To make matters worse, gator.ko sources in version 6.8 need some kernel API, that has changed in kernel 4.14.The same applies to the mali kernel driver (mali.ko, DX910-SW-99002-r9p0-01rel0), the Xilinx reference distribution for this chip is already on linux kernel 5.x, and Xilinx has to patch the mali.ko sources to still run this version.So I get the feeling I have to enable Mali400_profiling in mali.ko, and then fix gator.ko to run with the new kernel...