Hi folks,
An error occurred when I loading program onto the versatile-juno A57 by DS-5. The detail information is as shown as following. Basically, the MMU was turning on and the pages were mapping correctly. (Verified by FastModel)
Then I tried to load different images, but still got the same error message. And load failed at 40K or tenth page. (The page size is 4K.)
Any idea?
thanks,
Dave
DS-5 Command: loadfile "myimage.elf" Error message: --------- ERROR(CMD16-TAD274-NAL18): ! Failed to load "myimage.elf" ! Failed to write 33,284 bytes to address EL3:0x0000000000400B4C while writing block of 4,096 bytes to address EL3:0x0000000000403B4C ! Bus error on memory operation. --------- Debugger: ARM DS-5 Ultimate Edition 5.20.2 and Eclipse 4.3.2 ISA: ARMv8 AArch64 Environment: bare-metal Semi-hosting: on MMU: enable SCTLR_EL3: 0x00C5383D
DS-5 Command: loadfile "myimage.elf"
Error message:
---------
ERROR(CMD16-TAD274-NAL18): ! Failed to load "myimage.elf" ! Failed to write 33,284 bytes to address EL3:0x0000000000400B4C while writing block of 4,096 bytes to address EL3:0x0000000000403B4C ! Bus error on memory operation.
Debugger: ARM DS-5 Ultimate Edition 5.20.2 and Eclipse 4.3.2
ISA: ARMv8 AArch64
Environment: bare-metal
Semi-hosting: on
MMU: enable
SCTLR_EL3: 0x00C5383D
The header info of myimage.elf
myimage.elf: file format elf64-littleaarch64 myimage.elf architecture: aarch64, flags 0x00000012: EXEC_P, HAS_SYMS start address 0x0000000000001000 Program Header: LOAD off 0x0000000000000190 vaddr 0x0000000000001000 paddr 0x0000000000001000 align 2**3 filesz 0x0000000000004f94 memsz 0x0000000000004f94 flags r-x LOAD off 0x0000000000005124 vaddr 0x0000000000400b4c paddr 0x0000000000400b4c align 2**2 filesz 0x0000000000008204 memsz 0x0000000000008204 flags r-x LOAD off 0x000000000000d328 vaddr 0x00000000004267e4 paddr 0x00000000004267e4 align 2**2 filesz 0x000000000000677c memsz 0x000000000000677c flags rwx LOAD off 0x0000000000013aa4 vaddr 0x0000000000469360 paddr 0x0000000000469360 align 2**0 filesz 0x0000000000000008 memsz 0x0000000000000008 flags rw- LOAD off 0x0000000000013aac vaddr 0x000000000049bb70 paddr 0x000000000049bb70 align 2**0 filesz 0x000000000000d770 memsz 0x000000000000d770 flags rw- LOAD off 0x000000000002121c vaddr 0x00000040007feda0 paddr 0x00000040007feda0 align 2**0 filesz 0x00000000000002f0 memsz 0x00000000000002f0 flags rw- private flags = 0:
Hi Dave,
Please could you pass this on to ARM Technical Support?
They will be able to work through the problem at your convenience.
Thanks,
Joe