This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to connect the J-link with the DS-5

Now, I've a DS-5 debug tool and a J-link emulator, but I don't know how to connect the J-link to the DS-5.  Can anybody help me?

thanks.

Parents
  • Hi yilang98,

    Someone from Seggar should be able to help you here better than I can as J-Link is not an ARM product.

    However, I am aware that there is support for DS-5 provided by J-Link. I understand this is documented in the J-Link User Guide, Software Version 4.86, Manual Rev.2 dated June 6 2014.

    I hope this helps you.

    Regards,

    Stuart Hirons,

    ARM

Reply
  • Hi yilang98,

    Someone from Seggar should be able to help you here better than I can as J-Link is not an ARM product.

    However, I am aware that there is support for DS-5 provided by J-Link. I understand this is documented in the J-Link User Guide, Software Version 4.86, Manual Rev.2 dated June 6 2014.

    I hope this helps you.

    Regards,

    Stuart Hirons,

    ARM

Children
No data