Arm DS-5 v5.29.2 debug altera soc error

The gld option "-Ttext" can be used to set the code base address.
See e.g. ftp.gnu.org/.../ld_3.html

This can be added in the Project Properties, in "Other Flags" in the "Miscellaneous" section of the linker.

Alternatively, use a .ld linker script.  For an example, see the "fireworks_A9-FVP_GCC" example supplied in the DS-5 examples.

Hope this helps

Stephen

The gld option "-Ttext" can be used to set the code base address.
See e.g. ftp.gnu.org/.../ld_3.html

This can be added in the Project Properties, in "Other Flags" in the "Miscellaneous" section of the linker.

Alternatively, use a .ld linker script.  For an example, see the "fireworks_A9-FVP_GCC" example supplied in the DS-5 examples.

Hope this helps

Stephen