• Locked Locked
  • Replies 8 replies
  • Subscribers 120 subscribers
  • Views 4527 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DS5

Balaji Sridharan
Note: This was originally posted on 31st January 2011 at http://forums.arm.com

Hi,
I am facing an issue while i try to run a sample code in DS5.
The below mentioned error is being displayed.
"Cannnot run program "gdb": Launching Failed"
Can anyone provide me a solution to fix it?
Parents
  • Note: This was originally posted on 1st February 2011 at http://forums.arm.com


    It sounds like you might accidentally be using a host Debug configuration instead of one "DS-5 Debugger".  Are you using one of the DS-5 examples?  Can you be more specific about the steps you're taking to start the debug session including what the settings are in the debug configuration?  It would also be useful to know what version of DS-5 you're using.


    Hi Scott,
    Thanks for your response.
    I am not using any example codes. It is just basic arithmetic operation i am doing.
    After Build, i try to step through using the key F11.
    While doing so i am getting the above mentioned error.

    DS5 Details:
    DS500-BN-00003-r5p0-02rel0.zip this i downloaded from net and installed in my pc.
    Hope its version is 4.3
Reply
  • Note: This was originally posted on 1st February 2011 at http://forums.arm.com


    It sounds like you might accidentally be using a host Debug configuration instead of one "DS-5 Debugger".  Are you using one of the DS-5 examples?  Can you be more specific about the steps you're taking to start the debug session including what the settings are in the debug configuration?  It would also be useful to know what version of DS-5 you're using.


    Hi Scott,
    Thanks for your response.
    I am not using any example codes. It is just basic arithmetic operation i am doing.
    After Build, i try to step through using the key F11.
    While doing so i am getting the above mentioned error.

    DS5 Details:
    DS500-BN-00003-r5p0-02rel0.zip this i downloaded from net and installed in my pc.
    Hope its version is 4.3
Children
No data