Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.
We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.
Thank you for your understanding.
I am working with an S32V234 (NXP) branded ARMv8 Cortex-A53. I am trying to bring the board up in a secure way.I'm using DS-5 Development Studio Ultimate edition.I created a sample C Project. For flashing my code on that ARM Core.Firstly I Configured the DS-5 Configuration.I'm using DSTREAM debug agent for connecting to target also Configured the same and in the DS-5 Debug Prespective in Debug Configurations under DS-5 Debug I'm trying to create one new configuration while selecting the target I can't able to find my target board there.
HI, premchandh:
Did you finally get the effective solutions about this problem? Here I encounter a similar issue in Juno r2 board using d-stream in windows, which shows it cannot connect to the target board after I click the debug option button in Eclipse environment. Just as below:
Unable to connect to USB:000706
Failed to communicate with debug hardware using 'USB:000706'- please check it is available.
I have do some research on arm developer websites or google. And In the meantime I scan some d-stream official docs, but it still cannot help. if you have any good advice about it, please let me know. Thanks!