• State Not Answered
  • Locked Locked
  • Replies 0 replies
  • Subscribers 350 subscribers
  • Views 1399 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Corstone SSE-300 FVP simulator does not work

Sap1006

Hi.

I tried to run the Corstone SSE-300 (MPS3) simulator on the Cortex-M55 but an error occurs.

I use the ARM Development Studio.
Blog where possible hints would not open yet (https://community.arm.com/management/arm-blog-review/b/blogs-under-review/posts/software-development-for-corstone-300?_ga=2.69681104.1574093956.1625488272-560089144.1618816607).

Possible issue: I have used the wrong model parameters
I tried "-C fvp_mps2.DISABLE_GATING=1 -C cpu0.FPU=1 -C cpu0.MVE=2"    or     "-C cpu0.enable_helium_extension=1 -C cpu0.vfp-present=1 -C cpu0.vfp-enable_at_reset=1",     or any of their other variations.

Who managed to run the simulator? Please help me if it is possible to run the simulator? 

Thanks!