• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 353 subscribers
  • Views 4153 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC 2148 Push Button interrupt problem

Jai_Vyas

I am currently using LPC 2148.

I have a push button attached to port 0.15 and with every push the push button makes the pin high.

I want to count the push and with every push i want to store it into a variable and do some conversions at every push and Send the conversion data to LCD.

Can anyone guide me with the syntax, whether i should use interrupt or counter for the same?.

Parents
  • 0

    This is the second tutorial on LPC2148 where we are going to read the switches and turn ON/OFF the LEDs accordingly. Register Configuration The Below registers will be used for Configuring and using the GPIOs for sending and receiving the Digital signals. 

    ACES ETM

Reply
  • 0

    This is the second tutorial on LPC2148 where we are going to read the switches and turn ON/OFF the LEDs accordingly. Register Configuration The Below registers will be used for Configuring and using the GPIOs for sending and receiving the Digital signals. 

    ACES ETM

Children
No data