Hello,
I run a baremetal program on one core of the Cortex A9. The First Stage Bootloader (FSBL, Pre-Loader) and the Second Stage Bootloader (SSBL) perform perfectly. When the baremetal application (axf-file) is started in the debugger it executes without a problem. However when the baremetal application (bin-file) is exectued directly on the machine, the baremetal application cannot be started and the follwing error is thrown:
data abort
MAYBE you should read doc/README.arm-unligned-accesses
However, when the MMU is deactivated, the application (bin-file and axf-file) execute perfectly.
This leads me to the follwing questions:
Why can the program be started in the Debugger, and at the same time cause a data abort, when the binary is executed on the machine?
Why could the MMU cause a data abort, when the bin-file is started on the machine?
I would be grateful for any hints and tips. Many thanks in advance.
Deas
I take the liberty to just post the information about the elf-file.
readelf -h application.axf ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: ARM Version: 0x1 Entry point address: 0x100000 Start of program headers: 381792 (bytes into file) Start of section headers: 381824 (bytes into file) Flags: 0x5000402, Version5 EABI, hard-float ABI, <unknown> Size of this header: 52 (bytes) Size of program headers: 32 (bytes) Number of program headers: 1 Size of section headers: 40 (bytes) Number of section headers: 18 Section header string table index: 17