Does anyone have any ideas on interfacing the standard 8051 UART in mode 0 to interface to an I2C slave? I was thinking of writing the address of the slave, then shifting the acknowledge back in immediatley after. Any feedback would be appreciated. Matt
I would appreciate if anybody can provide software C samples to use I2C as master to communicate and control UART, because of the time deadline. Any reference to website or resources appreciated.
'I2C master to communicate and control uart' I think you need to explain exactly what you want to do. As mentioned previously, you don't connect I2C to uart! If you want a uart with an I2C interface, Maxim have a device that does this. You would use this device when you want to add more serial ports to your microcontroller via the I2C . Is this what you want to do? Gong Xi Fat Choi!
"I would appreciate if anybody can provide software C samples to use I2C ..." I note that you gave your e-mail address as: zhou.ming.yong@philips.com Surely someone at Philips should have access to all the I2C support one could ever wish for...?!
"I would appreciate if anybody can provide software C samples to use I2C ..." I note that you gave your e-mail address as: zhou.ming.yong@philips.com Is'nt it amazing. Software for IIC is in several appnotes at the Philips website http://www.semiconductors.philips.com/products/all_appnotes/ Erik