We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Does anyone have any ideas on interfacing the standard 8051 UART in mode 0 to interface to an I2C slave? I was thinking of writing the address of the slave, then shifting the acknowledge back in immediatley after. Any feedback would be appreciated. Matt
I would appreciate if anybody can provide software C samples to use I2C as master to communicate and control UART, because of the time deadline. Any reference to website or resources appreciated.
'I2C master to communicate and control uart' I think you need to explain exactly what you want to do. As mentioned previously, you don't connect I2C to uart! If you want a uart with an I2C interface, Maxim have a device that does this. You would use this device when you want to add more serial ports to your microcontroller via the I2C . Is this what you want to do? Gong Xi Fat Choi!
"I would appreciate if anybody can provide software C samples to use I2C ..." I note that you gave your e-mail address as: zhou.ming.yong@philips.com Surely someone at Philips should have access to all the I2C support one could ever wish for...?!
"I would appreciate if anybody can provide software C samples to use I2C ..." I note that you gave your e-mail address as: zhou.ming.yong@philips.com Is'nt it amazing. Software for IIC is in several appnotes at the Philips website http://www.semiconductors.philips.com/products/all_appnotes/ Erik