Support forums

Keil forum No Stellaris ICDI in Debugs Tab

State Accepted Answer
Locked Locked
Replies 18 replies
Answers 1 answer
Subscribers 22 subscribers
Views 25206 views
Users 0 members are here

Options

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No Stellaris ICDI in Debugs Tab

kilo over 5 years ago

I have a TIVA launchpad TM4C123GHPM. I was able to Debug the board/code with IAR and CCS. With uVision, when i go to Debug tab, I do not see the Stellaris ICDI option from the dropdown to select the ICDI. I am using uVision 5. I do see CMSIS-DAP Debugger option but no Stellaris ICDI. Am i missing anything during the uVision installation? Please advise.

Top replies

Christopher Seidl over 5 years ago +3 verified

Hello kilo, we have created an add-on installer that you can use to get back Stellaris ICDI support in MDK: http://www.keil.com/support/docs/4196.htm Kind regards, Christopher

Parents

0 Andy Neil over 5 years ago in reply to kilo

kilo said:
in 5.29 folks have removed Stellaris ICDI support altogether

Hardly surprising!

Stellaris was the brand name of Luminary Micro - who ceased to exist over a decade ago!

As already noted, check with TI for current debug options.
Cancel
Up 0 Down

Cancel

Reply

0 Andy Neil over 5 years ago in reply to kilo

kilo said:
in 5.29 folks have removed Stellaris ICDI support altogether

Hardly surprising!

Stellaris was the brand name of Luminary Micro - who ceased to exist over a decade ago!

As already noted, check with TI for current debug options.
Cancel
Up 0 Down

Cancel

Children

No data