• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 11167 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

OPTEE 2.0 tee-supplicant issue

Shengye Wan

Hi experts,

Today I was trying to use the latest OPTEE version to replace my previous one (v1.1.0) on my Juno board and I met one issue about tee-supplicant.

I used the initialization script from ashwildingarm 's post with the choice "Juno, latest, openembedded".

Now I have booted up my board with the new system.
I could successfully run the command modprobe optee_armtz while I got the error -sh: tee-supplicant: command not found when I was trying to use the command tee-supplicant &.

Is there anything I missed for running tee-supplicant?

By the way, now I'm following the instruction of optee_test for running TA.
If you have any other document about running a TA / xtest on latest OPTEE, please let me know so I could check the document by myself.

Thank you.

Simon