• Locked Locked
  • Replies 4 replies
  • Subscribers 120 subscribers
  • Views 2201 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IP Gateway

Daniele Bilancione
Note: This was originally posted on 25th June 2012 at http://forums.arm.com

Hi.

I am about to start a master degree course in Embedded Systems and I have an idea for my individual project. Basically I have an audio and video signal which will be encoded somehow; I would like to send such signal to a portable iOS based device over the LAN and collect from the device an audio signal only, as well as a few "push button" status which will be available on the app interface.

I have never used ARM technology before but I would like to start learning on such project. Having said that, I would be enormously grateful for any of your comments. Is ARM the right tool for that or is it a waste using ARM for such thing? If ARM would be suitable for my project, which processor /development board should I use?

Thank you for your time!
Parents
  • Note: This was originally posted on 25th June 2012 at http://forums.arm.com

    Hi Dsquared,
    ARM processor offering is wide enough for you to find what you need.
    On top of that, ARM Partners build a wide range of SoC with a wealth of features.
    If the signal is already encoded, you don't really need to do much except shift the packets to the network.
    I'm not sure from your description which device is supposed to separate the audio from video signal.

    You probably have heard about the Raspberry Pi evaluation board. It features an ARM11 processor with network connection.
    Thanks to its cheap price, you don't care about its extra features like HD video playback.

    As you can run some Linux distro on it, you can re-use video streaming software and can concentrate on the push button stuff you want.
    Have a look at First Taste of Raspberry Pi...
    You have so many boards that it's like with a big menu, choice is the problem :)

    Cheers,
    Alban




    Hi.

    I am about to start a master degree course in Embedded Systems and I have an idea for my individual project. Basically I have an audio and video signal which will be encoded somehow; I would like to send such signal to a portable iOS based device over the LAN and collect from the device an audio signal only, as well as a few "push button" status which will be available on the app interface.

    I have never used ARM technology before but I would like to start learning on such project. Having said that, I would be enormously grateful for any of your comments. Is ARM the right tool for that or is it a waste using ARM for such thing? If ARM would be suitable for my project, which processor /development board should I use?

    Thank you for your time!
Reply
  • Note: This was originally posted on 25th June 2012 at http://forums.arm.com

    Hi Dsquared,
    ARM processor offering is wide enough for you to find what you need.
    On top of that, ARM Partners build a wide range of SoC with a wealth of features.
    If the signal is already encoded, you don't really need to do much except shift the packets to the network.
    I'm not sure from your description which device is supposed to separate the audio from video signal.

    You probably have heard about the Raspberry Pi evaluation board. It features an ARM11 processor with network connection.
    Thanks to its cheap price, you don't care about its extra features like HD video playback.

    As you can run some Linux distro on it, you can re-use video streaming software and can concentrate on the push button stuff you want.
    Have a look at First Taste of Raspberry Pi...
    You have so many boards that it's like with a big menu, choice is the problem :)

    Cheers,
    Alban




    Hi.

    I am about to start a master degree course in Embedded Systems and I have an idea for my individual project. Basically I have an audio and video signal which will be encoded somehow; I would like to send such signal to a portable iOS based device over the LAN and collect from the device an audio signal only, as well as a few "push button" status which will be available on the app interface.

    I have never used ARM technology before but I would like to start learning on such project. Having said that, I would be enormously grateful for any of your comments. Is ARM the right tool for that or is it a waste using ARM for such thing? If ARM would be suitable for my project, which processor /development board should I use?

    Thank you for your time!
Children
No data